Introduction to PVA film production line

1. The maximum width of coating is 1150 millimeters, and the thickness ranges from 30 micrometers to 100 micrometers;
2. Coating rate of 150-250 kg/hour;
3. At room temperature -120 degrees, the mold head does not deform and maintains the linear accuracy of the mold lip;
4. The mold head can be designed with a hot water heating circulation channel, which can heat at a constant temperature of 60-95 degrees;
5. The steel belt transmission unit adopts special stainless steel, with a width of 1200 millimeters, a thickness of 1 millimeter, and a length of 40-45 meters;
6. The steel strip is made of special stainless steel, which has good creep resistance, polishing treatment, good flatness, no scratches on the surface, and good straightness;
7. All electrical controls adopt well-known domestic and foreign brand products, and the electrical structure has two options: PLC and human-machine touch screen control.

Equipment parameters for PVA film