Company news
Wuhan modern plasticizer
Wuhan modern plasticizer1、 Definition and requirement of plasticizer 1. Plasticizer and plasticizer A substance added to a polymer system to incr…
Company news 334 2020-12-15
Wuhan Handern Molding Technology
Wuhan Handern Molding Technology1 molding processThe molding process includes: ① weighing the molding compound and pre-pressing the ingot; ② preheating the mol…
Company news 339 2020-12-14
Wuhan Handern Cast film
Wuhan Handern Cast film Cast film is also called cast film. The casting method is a method in which a plastic solution with a certain viscosity is coated on a…
Company news 350 2020-12-11
Wuhan Handern special-shaped production equipment
Wuhan Handern special-shaped production equipmentProfile production equipment is the same as pipe and sheet extrusion molding, mainly including extruder, die, sh…
Company news 352 2020-12-10
Wuhan HanDern Preparation before forming of raw materials
Wuhan HanDern Preparation before forming of raw materials Preparations before molding include pretreatment of raw materials such as drying and crushing, mixin…
Company news 364 2020-12-09
Wuhan Handern Classification, performance and characteristics of light stabilizers
Wuhan Handern Classification, performance and characteristics of light stabilizersThere are many kinds of light stabilizers. According to their mechanism of acti…
Company news 347 2020-12-08
Wuhan Handern Orientation of plastics in the molding process
Wuhan Handern Orientation of plastics in the molding process 1. Flow orientation(1) In the isothermal flow area, due to the small cross-section of the pipe, the …
Company news 366 2020-12-07
Thermoforming of Wuhan HanDern Plastic
Thermoforming of Wuhan HanDern PlasticI. OverviewThermoforming is a method of manufacturing materials using thermoplastic sheets as raw materials. During manufac…
Company news 378 2020-12-04
Wuhan HanDern Selection and use of filler
Wuhan HanDern Selection and use of filler1. The choice of fillerMainly depends on the particle size and distribution, particle shape, surface area, stacking meth…
Company news 387 2020-12-03
Wuhan Handern Extrusion, Push Forming Equipment and Process
Wuhan Handern Extrusion, Push Forming Equipment and Process1. Extrusion of PTFEBecause the melt viscosity of PTFE is greater than 10-16 Pas (360C), it cannot be …
Company news 362 2020-12-02
Wuhan Handern Dipping and Gluing Process
Wuhan Handern Dipping and Gluing Process Dipping and sizing is a key process for manufacturing the advantages and disadvantages of laminated plastic products.…
Company news 420 2020-12-01
Wuhan HanDern Molding Technology
Wuhan HanDern Molding TechnologyThe thermoforming operation process includes: (1) clamping of the sheet; (2) heating (3) forming (4) cooling; (5) demolding.1. Cl…
Company news 376 2020-11-30