PVC sheet production line
DATE：2020/10/19 8:57:46 / READ： / SOURCE：This station
PVC sheet production line
The PVC sheet production line is imported from Italy AMUT company. The thickness range of film can be 0.15 mm - 1.5 mm mm.www.handern . com non woven equipment(1) Twin screw vacuum exhaust extruder. The model of twin-screw vacuum exhaust extruder is ba-100, the power of extrusion motor is 44kw, the heating power is 51kw, the diameter of screw is 100 mm, the ratio of length to diameter is 21:1, and the screw speed is 4R / min-40r/ min.www.handern . com non woven equipment
(2) The width of die lip is 1146 mm and the gap of die lip is 0.15 mm-1.6 mm. It is heated in five sections and the power is 14 kW. www.handern.com Non woven equipment
(3) Three roller calender. The width of calendering roller is 1200mm, and the diameter of upper, middle and lower rollers are 247m, 340mm and 340mm respectively. Each of the three rollers has a set of independent circulating heating water temperature regulating device, and the heating power is 36kw. At the same time, the lower roller and the traction roller are also equipped with fine adjustment device to keep the film with a certain tension.
(4) High speed kneader. The model is ch-200dq, the total volume is 0.2m2, the effective volume is 0.14m2, the outer wall is electrically heated, the power is 9kw, the stirring speed is 475r / min and 950r / min, the motor power is 28kw / 40kW. www.handern.com Non woven equipment
(5) Low speed cold mixer. The model is lh-400, the total volume is 0.4m3, the effective volume is 0.14m3, the jacket circulating water is used for cooling, the stirring speed is 125R / min, the motor power is 1lkw, and the cooling water volume is 0.027m3/min
(6) Mechanical vibrating screen. The model is kds-1000, the screen diameter is 1000mm, the vibration frequency is 1400 times / min, and the motor power is 11 KW.www.handern . com non woven equipment
Author：admin