Wuhan Handern Breathable film machine
DATE：2020/4/24 14:12:19 / READ： / SOURCE：This station
Wuhan Handern Breathable film machine
(1) The thick film is attached with a recycling mark to facilitate recycling and reuse, such as general PE heavy packaging films and thicker films. When printing packaging bags, the recycling mark is printed at the same time, which is convenient for recycling.
In order to facilitate the recycling of plastic waste, various advanced countries have formulated identification marks, and China has also formulated standards for identification marks for plastic recycling.To inspections and 9T all-in-one generations of highly stable and general light packaging films, the implementation of recycling marks, may have some difficulties, but as long as you insist, take effective measures, it should be better than burning, landfill. To some extent, it is more advantageous than using degraded plastics. www.handern.com Breathable membrane equipment
2) In the factory, the product waste of the corner waste in the factory is recovered by itself. The source of the waste is clear, and the classification and quantity of materials are easy to grasp. Therefore, it is the most effective method to recycle and apply thoroughly in the factory, and use the waste of each process to use the entire waste to form a closed system for regeneration. For example, the trimming waste during film production is crushed and mixed with new materials at a certain ratio. Generally, new-type film production lines are equipped with this device. This method is also conducive to reducing costs. www.handern.com Breathable membrane equipment
(3) Composite thin film technology and plastic recycled materials often have low appearance and color freedom. The general color is gray to black, and other flicker colors are restricted. Restricted for this purpose. You have to make only products with low added value. In order to break this limitation, consider using composite layer molding. The middle layer is recycled material. The inner and outer layers are new materials, and their quality and appearance are not inferior. For example, a 3-layer film with a recycled material in the middle. This method also uses www.handern.com breathable film equipment in many factories.
(1) The thick film is attached with a recycling mark to facilitate recycling and reuse, such as general PE heavy packaging films and thicker films. When printing packaging bags, the recycling mark is printed at the same time, which is convenient for recycling.
In order to facilitate the recycling of plastic waste, various advanced countries have formulated identification marks, and China has also formulated standards for identification marks for plastic recycling.To inspections and 9T all-in-one generations of highly stable and general light packaging films, the implementation of recycling marks, may have some difficulties, but as long as you insist, take effective measures, it should be better than burning, landfill. To some extent, it is more advantageous than using degraded plastics. www.handern.com Breathable membrane equipment
2) In the factory, the product waste of the corner waste in the factory is recovered by itself. The source of the waste is clear, and the classification and quantity of materials are easy to grasp. Therefore, it is the most effective method to recycle and apply thoroughly in the factory, and use the waste of each process to use the entire waste to form a closed system for regeneration. For example, the trimming waste during film production is crushed and mixed with new materials at a certain ratio. Generally, new-type film production lines are equipped with this device. This method is also conducive to reducing costs. www.handern.com Breathable membrane equipment
(3) Composite thin film technology and plastic recycled materials often have low appearance and color freedom. The general color is gray to black, and other flicker colors are restricted. Restricted for this purpose. You have to make only products with low added value. In order to break this limitation, consider using composite layer molding. The middle layer is recycled material. The inner and outer layers are new materials, and their quality and appearance are not inferior. For example, a 3-layer film with a recycled material in the middle. This method also uses www.handern.com breathable film equipment in many factories.
Author：admin