Food for children
DATE：2019/12/27 9:01:51 / READ： / SOURCE：This station
Food for children
During the formulation process, there must be no water infiltration. The first flexible packaging bag appeared in the United Kingdom in the 1960s, and then there were spiral-wound composite cans for packaging dry cereals, such as: ionic resin / AI foil / LDPE / paper made of composite cans. It is also possible to use heat seal layers / aluminum foil / PET / paper. Children's packaging of dehydrated fruits and vegetables and meat was widely used in the United Kingdom in the 1980s. The inner layer is paper / LDPE / aluminum foil / ionic resin, and the center layer is cardboard.
Use case is
Provides rigidity; while the outer layer is a paper label. The top and bottom are aluminum foil, while the PE cover can be opened and closed again. This canister can be produced on a filling and filling line like a metal can, with a shelf life of two years.
Product 2. Liquid and semi-solid children's foods are farther away from B. Since the mother E. The fruit juice is the first non-ready-to-eat children's food packaged in plastic. An example of a successful packaging with a long pot life has been extended by plastic bottles, typically with a 15-month shelf life. For tomato sauce, PP / recycled PP / adhesive resin / EVOH / adhesive resin / PP 1138 thermoformed container has replaced about 1/4 of the glass container. The standard button caps used on glass containers can also be used on composite tank containers. Juice products are hot-filled, and plastic containers are sterilized during the process, a cooling liquid is used to create a vacuum, and water is used to flush the space inside the tank. The use of PP / adhesive resin / PVDC / adhesive resin / PP structure also has a shelf life of ten months. Tetrahedral aseptic packaging cartons are more common in Europe. Nianyue
3. Dry Toy Food Day 9) Static) T39 dry toy foods need to be resistant to grease packaging and have good cleanliness. Boxes are the most widely used toy food packaging type. Paper bags or paper bags with an inner layer of extruded PE or PP coated with protective printing varnish are widely used in toy food packaging. For semi-moist foods with a moisture content below 35%, metal cans have traditionally been used for packaging. In order to save weight and cost, spiral cans with full soft structure can also be used: paper / LDPE / aluminum foil / ionic resin. The printed surface is top-coated varnish or an OP film. Ionic resin or acid copolymer as the sealing layer can have strong sealing and fat resistance. Another kind of structure is: Replace the common topic? Paper / adhesive resin / metallized OP / heat seal layer. A common mid-plane axis adhesive resin is used for the adhesion of paper to metallized OPP. LDPE or an acid copolymer can be used, and it can be selected according to the requirements of adhesion. Here, metallized OPP has good barrier properties, crack resistance, and pinhole resistance. This product is commonly used in 1H0 countries in 1H0. It looks the same as the 1st industry and 0 jumping countries.
The rationale of the sea, the end of the training of the sea
Is used only for
During the formulation process, there must be no water infiltration. The first flexible packaging bag appeared in the United Kingdom in the 1960s, and then there were spiral-wound composite cans for packaging dry cereals, such as: ionic resin / AI foil / LDPE / paper made of composite cans. It is also possible to use heat seal layers / aluminum foil / PET / paper. Children's packaging of dehydrated fruits and vegetables and meat was widely used in the United Kingdom in the 1980s. The inner layer is paper / LDPE / aluminum foil / ionic resin, and the center layer is cardboard.
Use case is
Provides rigidity; while the outer layer is a paper label. The top and bottom are aluminum foil, while the PE cover can be opened and closed again. This canister can be produced on a filling and filling line like a metal can, with a shelf life of two years.
Product 2. Liquid and semi-solid children's foods are farther away from B. Since the mother E. The fruit juice is the first non-ready-to-eat children's food packaged in plastic. An example of a successful packaging with a long pot life has been extended by plastic bottles, typically with a 15-month shelf life. For tomato sauce, PP / recycled PP / adhesive resin / EVOH / adhesive resin / PP 1138 thermoformed container has replaced about 1/4 of the glass container. The standard button caps used on glass containers can also be used on composite tank containers. Juice products are hot-filled, and plastic containers are sterilized during the process, a cooling liquid is used to create a vacuum, and water is used to flush the space inside the tank. The use of PP / adhesive resin / PVDC / adhesive resin / PP structure also has a shelf life of ten months. Tetrahedral aseptic packaging cartons are more common in Europe. Nianyue
3. Dry Toy Food Day 9) Static) T39 dry toy foods need to be resistant to grease packaging and have good cleanliness. Boxes are the most widely used toy food packaging type. Paper bags or paper bags with an inner layer of extruded PE or PP coated with protective printing varnish are widely used in toy food packaging. For semi-moist foods with a moisture content below 35%, metal cans have traditionally been used for packaging. In order to save weight and cost, spiral cans with full soft structure can also be used: paper / LDPE / aluminum foil / ionic resin. The printed surface is top-coated varnish or an OP film. Ionic resin or acid copolymer as the sealing layer can have strong sealing and fat resistance. Another kind of structure is: Replace the common topic? Paper / adhesive resin / metallized OP / heat seal layer. A common mid-plane axis adhesive resin is used for the adhesion of paper to metallized OPP. LDPE or an acid copolymer can be used, and it can be selected according to the requirements of adhesion. Here, metallized OPP has good barrier properties, crack resistance, and pinhole resistance. This product is commonly used in 1H0 countries in 1H0. It looks the same as the 1st industry and 0 jumping countries.
The rationale of the sea, the end of the training of the sea
Is used only for
Author：admin