How to quickly solve the forming failure of the hollow board production line
DATE：2024/7/22 15:08:48 / READ： / SOURCE：This station
Many of our customers often encounter problems in the molding of hollow boards due to incorrect parameter settings or non-standard operating behavior when using hollow board production lines. So, how should we deal with such problems?
When there is a molding problem in the hollow board production line, we must start from scratch to check whether the raw materials used meet the production requirements; Secondly, it is necessary to modify the parameters one by one. It is important to remind everyone that they must modify each running parameter one by one and not all at once. After completing these two tasks, if there are still molding problems in the hollow board production line, it is necessary to troubleshoot the equipment itself.
When troubleshooting the hollow board production line, we should be aware that sometimes different molding faults can be solved using the same method, as they may be caused by the same reasons. Therefore, when investigating the cause of faults, we need to summarize the causal mechanism and countermeasures of the items that first appeared, and then find suitable solutions. For the items that appeared later, we only make simple records. If we find that they belong to the same type of fault as the previous ones, we can use the same solutions. If we find that the fault type is different, we will continue to summarize the causal mechanism and countermeasures, and then find the corresponding solutions.
Here, the editor will briefly introduce how to summarize the causes and countermeasures of faults. In order to identify the causes, it is necessary to first clarify what the problem is, that is, an accurate description of the fault. Secondly, a multi-dimensional analysis of the fault should be conducted, such as production, operation, equipment, materials, etc; After identifying the causal mechanism, when summarizing countermeasures, we also need to analyze from multiple aspects, such as cost, time, operability, etc., to find the most suitable solution for the current situation of the enterprise.
Author：admin